Roland DWX-4W Wet 4-Axis Dental Milling Machine
$5,000.00
Viewed 4452 times
Share This
Categories
Cart
Account
Search
Recent View
Go to Top
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Product Description
Condition: Brand New
Warranty: 2 Years Global Warranty
Payment method: Crypto Currency,Bank to Bank Transfer,Western Union,Ria Transfer,Money Gram,e.t.c
Delivery method: 4 to 5 working days (door to door delivery).
Specification:
| Cuttable material | Glass ceramics, Composite resin | |
| Loadable workpiece shape | Width | Maximum 40 mm (1.57 in) |
| Depth | Maximum 20 mm (0.79 in) | |
| Height | Maximum 20 mm (0.79 in) | |
| Operating speed | 6 to 1,800 mm/min. (0.24 to 70.9 in./min.) | |
| Spindle motor | Jaeger high frequency spindle | |
| Spindle speed | 15,000 to 60,000 rpm | |
| Rotary axis travel angle | A axis | ± 360° |
| Number of burs housed | 4 | |
| Attachable bur | Shank diameter | 3 mm Dedicated milling bur for wet grinding |
| Compatible compressed air* | Pressure | 0.7 to 1.0MPA (101-145psi) |
| Air Capacity | 114L/min (30gal) or more | |
| Tank Capacity | 33L (8.7gal) or more | |
| Interface | USB | |
| Control command set | RML-1, NC code | |
| Power requirements | AC 100 to 240 V ± 10%, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1) | |
| Power consumption | Approx. 200 W | |
| Operating noise | During operation | 70 dB (A) or less (when not milling) |
| During standby | 48 dB (A) or less | |
| External dimensions | Width x Depth x Height | 480 x 538 x 599 mm (18.9 x 21.2 x 23.6 in.) |
| Weight | 53 kg (116.8 lbs.) | |
| Installation environment | Indoor use, Altitude | Up to 2,000 m (6,562 ft.) |
| Temperature | 5 to 28 °C (41 to 82.4 F) | |
| Relative humidity | 35 to 80 % (no condensation) | |
| Ambient pollution degree | 2 (as specified by IEC 60664-1) | |
| Short-term temporary overvoltage | 1,440 V | |
| Long-term temporary overvoltage | 490 V | |
| Included items | Power cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit | |
| System requirements for USB connection | Operating system | Windows® 7/8/8.1/10 (32 or 64 bit) |
| USB cable | Use the included USB cable | |